RG1000 Sheet

RG1000 has no odour and is non toxic while it is also tasteless. Furthermore, it is economical and offers a low level of moisture absorption. It is self lubricating and has a low level of friction while it is resistant to water and a wide range of chemicals.

RG1000 Sheet has some limitations, including a maximum operating temperature of 90°C, a short-term operating temperature of 120°C, and a melting point of around 135°C. It may not be well-suited for high tensile applications. Since it is a recycled version of UHMWPE, it may not be compatible in all aspects. Additionally, it is not FDA approved, as there is no white/natural grade available.

RG1000 Sheet, also known as "regen," is the recycled grade of UHMWPE. It offers sliding and abrasion performance close to that of virgin grade. This material is suitable for low friction sliding applications and is commonly used in areas that do not require the unique properties of virgin UHMWPE, such as Food or Pharmaceutical. RG1000 Sheet has an incredibly low coefficient of friction, providing components with a high lifespan and minimal drag. It is resistant to many dilute acids, solvents, and cleaning agents.

Due to its excellent abrasion resistance, RG1000 Sheet is often used for lining chutes, hoppers, slide-ways, and wear blocks in aggressive environments. It is also suitable for marine applications with high demand, thanks to its low moisture absorption. However, it should only be used for non-FDA applications, such as forest-product drag conveyor flights, conveyor-chain wear plates, and belt-conveyor wipers and skirts.

RG1000 Sheet is not suitable for food contact applications or medical uses.

RG1000 Sheet is a regenerated grade that offers almost identical performance to virgin grade RG1000 Sheet at a reduced price, making it suitable for projects on a budget or those that do not require FDA approval.

RG1000 Sheet is very similar to Virgin UHMWPE but comes with a definite price advantage. It exhibits an exceptionally low coefficient of friction, providing superb sliding properties and exceptional wear and abrasion resistance. The sheet is tough even at low temperatures, lightweight, and easy to weld, although bonding can be challenging.

When machining RG1000 Sheet, it is recommended to use high-speed steel tooling with ample back rake, side rake, clearances, and a generous nose radius. Clamping parts without distortion can be challenging, and when drilling, the drill may tend to screw into the material.

All UHMWPE plastics, including RG1000, do not absorb water readily, nor wet easily, making bonding difficult.

RG1000 is not approved for any use in food applications.

Yes, RG1000 sheet is highly resistant to abrasion, even more so than carbon steel in some forms.

RG1000 is highly resistant to corrosive chemicals, except for oxidising acids.

RG1000 has a significantly lower coefficient of friction than nylon and acetal, comparable to that of PTFE or Teflon, while offering better abrasion resistance than PTFE. It has a slippery surface texture that feels almost waxy.

RG1000 Sheet is commercially available in two common sizes of 2000mm X 1000mm and 3000mm X 1250mm, with thicknesses ranging from 5 mm to 80mm. It is currently only available in black or green.

RG1000 Sheet, also known as "regen," is a versatile and cost-effective alternative to virgin UHMWPE. It offers excellent sliding and abrasion performance, making it suitable for a wide range of applications. However, it is essential to note that RG1000 Sheet is not FDA approved and should not be used in food contact applications.